27
EN
Oil cock
Warning: gasoline is highly
volatile, flammable and
explosive.
Warning: Check the oil
level
before operation.
Fuel gauge
Voltmeter
ON/OFF
Alternating current (AC)
Direct current (DC)
Overload cut-out
Positive pin of direct
current/Negative pin of
direct current
Selection switch
120V~/240V~
120 V~ socket-outlet
240 V~ socket-outlet
Technical data
PG2200-3
2500W GENERATOR
AC FREQUENCY(HZ): 60HZ
Continuous rated power (S1):
2000 W/240 V; 2000 W/120 V~
Maximum power max (S2 5 min):
2500 W/240 V~; 2500 W/120 V~
AC OUTPUT VOLTAGE: 120V/240V
TRANSFER SWITCH: YES
RATED/MAX AC CURRENT 120V:
16.7/20.8 AMPS
RATED/MAX AC CURRENT 240V:
8.3/10.42 AMPS
DC OUTPUT: 12V/8.3A
SOCKETS : 2*120V+1*240V
ENGINE: SINGLE-CYLINDER
FORCED AIR-COOLED 4-STROKE OHV
POWER: 6.5 HP / 3600 RPM
DISPLACEMENT(CC): 196 CC
STARTING SYSTEM:
HAND RECOIL START
FUEL TANK CAPACITY: 3.9 GAL (15 L)
OIL CAPACITY: 0.16 GAL (600 ML)
Operating mode S1 (continuous
operation)
The machine can be continuously operated
with the quoted power output.
Operating mode S2 (temporary
operation)
The machine may be temporarily operated
with the quoted power output. Afterwards
the machine must be stopped for a while to
prevent it from overheating.
Warning!
Exhaust contains poisonous carbon
monoxide gas that can build up to
dangerous levels in closed areas.
Breathing carbon monoxide can cause
unconsciousness or death.
Never run the generator in a closed, or
even partly closed area where people may
be present.
DESCRIPTION, SPECIFICATIONS AND INSTRUCTIONS
240 V
120 V
L1,2 AC 120V~
AC 240V~
Summary of Contents for 59695030
