12
Attach grass catcher following instructions in the Assembly section.
Grass clippings will automatically collect in catcher as you operate
the mower.The faster you push the mower,the more effectively it will
collect clippings.Operate the mower until grass catcher is full.
Remove the grass catcher's strap from the lower handle's crossbar
and lift the grass catcher up and away from the mower to remove
the bag.Dispose of the grass clippings and reinstall the bag when
complete.
Minimum care is required to ensure smooth operation of your mower.
To avoid damage to mower or cutting blades, keep area to be mowed
free from debris.
For best results, regularly apply lubricant to mower’s cutting
surfaces, cutting reel axle shaft and wheels.
Spread a thin layer of lapping compound on the front edge of the reel
blades.
Adjust the cutter bar so that the blade has light but firm contact
across the full width of the cutter bar.
CAUTION
: Do not overtighten adjusting screws, as this could
damage the cutter bar. Tighten both screws during final adjustment.
Turn the reel blades until the front edge of the cutter bar blade is
polished.
NOTE
: Use industrial or valve lapping compound between 100 and
240 grit. Lubricate the axle and pinion with a light film of wheel
bearing grease.
You can use the grass catcher to collect clippings while you are
operating the mower.
1.
2.
1.
2.
3.
1.
2.
3.
Using Grass Catcher
Sharpening the Cutting Blades
MAINTENANCE
WARNING!
Clean any grinding compound or debris from the cutter bar
blade, reel blade, pinions and pawls.
OPERATION
ENGLISH
