ENGLIS
H
position before connecting to power source, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that
have the switch on invites accidents.
d) remove any adjusting key or wrench before turning the power tool on.
A
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) do not overreach. Keep proper footing and balance at all times.
This enables
better control of the power tool in unexpected situations.
f) dress properly. do not wear loose clothing or jewelry.
Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be
caught in moving parts.
4. Power tool use and care
a) do not force the power tool. use the power tool correctly for your
application.
The correct use will do the job better and safer at the rate for which
the tool was designed.
b) do not use the power tool if the switch doesn’t turn it on & off.
Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) disconnect the plug from the power source from the power tool before
making
any adjustments, changing accessories, or storing power tools.Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool.
Power tools are dangerous in the hands of untrained users.
e) maintain power tools. check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation.
If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) use the power tool, accessories etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a
hazardous situation.
g) do not attempt to modify the power tool in any way.
The use of any
attachment or accessory other than those included could result in damage to the
power tool and injury to the operator.
h) Service should only be carried out by qualified professional technician
using original spare parts.
Failure to do so may result in considerable danger to
the user, including electric shock or injury.
i) always observe general fire safety precautions when using certain power
tools inside your house or workshop.
It is recommended that you have an
appropriate fire extinguisher available at all times while working.
4
