18
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . 18-19
UNPACKING AND CHECKING CONTENTS . . . . . . . . . . . 19
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
FEATURES AND SPECIFICATIONS . . . . . . . . . . . . . . . . .20
PACKAGE CONTENTS AND HARDWARE LEGEND . . . 21-24
ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-29
FOLDING YOUR TOOL STAND . . . . . . . . . . . . . . . . . . . . . 30
UNFOLDING YOUR TOOL STAND . . . . . . . . . . . . . . . . . . 31
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
TABLE OF CONTENTS
SAFETY INSTRUCTIONS
Safety items throughout this manual are labeled with WARNING
and CAUTION.
READ ALL SAFETY INSTRUCTIONS BEFORE USING. Read the owner’s
manual carefully. Learn its applications and limitations as well as the
specific potential hazards.
DO NOT USE FOR SCAFFOLDING OR AS A LADDER.
DO NOT OVERLOAD. Maximum capacity for the Mobile Tool Stand is
375 lbs (170 kg), evenly loaded across tabletop.
DO NOT APPLY AND UNBALANCED LOAD. This could cause the tool
stand to tip over.
FULLY OPEN BEFORE USE. Do not attempt to use your tool stand unless
the jaws are securely locked in place. Be sure the tool stand’s leg set frame
assembly is in the fully-opened position before using.
AVOID PINCH POINTS. To prevent personal injury while opening or
closing your tool stand, always avoid positioning hands or fingers where
they could get pinched.
USE CARE WHEN USING POWER TOOLS. When using a power tool with
the tool stand, ALWAYS follow the safety instructions in the power tool
owner’s manual. ALWAYS wear safety glasses or eye shields when operating
power tools. When operating a stationary power tool on your tool stand,
such as a miter saw, be sure the tool is securely bolted to a separate piece
of plywood and the plywood is securely clamped to the mobile tool stand.
DO NOT clamp or mount stationary power tools directly to tabletop. This
could cause serious injury. When operating a portable power tool such as a
drill, router, sander, or planner: Always be sure that the workpiece is
securely clamped to your tool stand. This will avoid kickback, which could
cause serious bodily injury.
Means that failure to follow this safety statement may
result in extensive product damage, serious personal
injury, or death.
Means that failure to follow this safety statement may
result in minor or moderate personal injury, or property
or equipment damage.
ENGLISH
Summary of Contents for 53305008
