Haussmann 02255003, Operator'S Manual

Page: 40 / 44

GENERAL MAINTENANCE
• Keep the shredder clean and in good repair for maximum performance and machine longevity.
• Before each use, inspect the switch and cord for damage.
• Check for damaged, missing, or worn parts. Check for loose screws, moving parts that are jammed
or any other conditions that may affect the operation.
• If abnormal vibration or noise occurs, turn OFF the tool immediately and correct the problem before
further use.
• Do not use the shredder until it is properly repaired or replaced.
• Wipe the outside of the shredder with a dry soft cloth.
• Remove the hopper from the housing body before washing the inside of the hopper.
• Do not hose down or wash the tool with running water.
CLEANING
40
To avoid injury, electric shock, or damage to the shredder, never allow a liquid to flow inside the tool.
WARNING
To avoid damage or electric shock, do not use strong solvents or detergents on the plastic housing
or plastic components. Certain household cleaners may cause damage and may also cause a
shock hazard.
WARNING
Some dust created by power sanding, shredding, grinding, drilling and other construction activities
contains chemicals known to the state of California to cause many serious diseases such as cancer.
Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemical: work in a well ventilated area, and work with approved safety
equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING (PROPOSITION 65)
ENGLISH
MAINTENANCE