SHREDDING YARD DEBRIS
(See Figure 8)
The shredder is designed to work on yard waste, debris, sticks and twigs up to 1-1/2" (3.8 cm) in
diameter. The shredder material will accumulate directly on the ground under the shredder.
• Turn ON the chipper.
• Place sticks in the narrow opening of the hopper. Do not place your hands inside the hopper.
• Use the push paddle (1) to help feed material into the hopper.
• Turn the chipper OFF and allow it to come to a complete stop.
37
Do not attempt to shred material that exceeds the capacity of the shredder.
NOTE: This chipper is designed for dry material only. Never place green material into the chipper.
C A U T I O N
Do not try to shred any material that exceeds the capacity of this tool. Doing so may cause the
motor to jam and overheat. Never put your hands in the hopper or near the blade when the tool
is running.
WARNING
To prevent an accidental start-up if the reset button is pushed, the ON / OFF switch should be in
the off position and the plug should be removed from the power source while cool down takes
place.
WARNING
Fig. 7
2
1
ENGLISH
OPERATION
Summary of Contents for 02255003
Page 22: ...22 FRANÇAIS VUE ÉCLATÉE ...
Page 24: ...24 FRANÇAIS REMARQUES ...
Page 42: ...42 ENGLISH EXPLODED VIEW ...
Page 44: ...44 ENGLISH NOTES ...
