3. PREPARE THE HOOD
3.1
ALL INSTALLATIONS
1.
Lay the hood on its top on a table. Use a piece
of cardboard to avoid damaging the table or
the hood. Slide the main grease cup out and
set aside. Remove the bottom panel 7 retaining
screws. Set bottom panel and screws aside.
GREASE Cup
2.
Remove both electrical box cover retaining screws. Remove cover and set aside with screws.
Turn the hood over and punch out the wiring knock-out located on TOP of the unit and install
the wire clamp (included).
3.2
VERTICAL DISCHARGE ONLY
1.
Remove the shutoff plate 10 retaining screws. Set the screws aside and discard the
shutoff plate.
6" ROUND DUCT INSTALLATION
2.
Mount the 6" round adapter/damper on top of the hood, using the 10 screws previoulsy
removed.
3¼" x 10" DUCT INSTALLATION
2.
Mount the
3¼"
x 10" adapter/damper on top of the hood, using the 10 screws previously
removed.
HAUSLANE
267 Wattis Way, South San Francisco, CA 94080
Tel: 1-800-929-0168 Email: [email protected]
5
a
..
...