2. PREPARE INSTALLATION
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
Tools needed to install the range hood:
- Phillips screwdriver no. 2
- Pair of long nose pliers
- Flat blade screwdriver (to open the electrical knockout hole)
- Scissors (to cut metal foil duct tape)
- Wire stripper
Make sure the following items are included:
- Hood
- Adapter/dampers: Horizontal 3¼" x 10'; vertical 3¼" x 10" and vertical 6" round
- Halogen bulbs (2) (JC type, 12 V, 20 W, G4 base)
- Parts bag including: 1 wire clamp, 4 no. ST4.8 x 15 mm mounting screws, 3 wire connectors
NOTE: If the bottom of the cabinet is recessed, attach wood strips (not included), as shown beside, in
order to properly install the range hood under the cabinet. The wood strips must be as thick as
recess.
Cut-out the openings for duct
(A)
and power cable
(B),
in cabinet or wall, according to the direction of discharge chosen. See illustrations
below.
VERTICAL DISCHARGE (6"RoUND DucT)
,t 1¼"
CABINET BOTTOM VIEW
VERTICAL DISCHARGE
(3¼"
X
10"
DUCT)
i
3
wJ
I (
i
,i��"
4..-e
t1¾"
. .-125/a"-:
,t 1 ¼"
CABINET BOTTOM VIEW
HAUSLANE
267 Wattis Way, South San Francisco, CA 94080
Tel: 1-800-929-0168 Email: [email protected]
I
4
HORIZONTAL DISCHARGE
I I
I
f----125/a"�
l
I
e- --
1
-,- 1¾"
CABINET BOTTOM VIEW