Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
You can also use WinTV-NOVA-TD
in Dual Tuner mode, instead
, to
record one channel while recor-
ding an other.
For this, you must plug a good
roof top aerial to both inputs of
the
WinTV-NOVA-TD
(some
cables might be required, not
included).
Then, click on
Start / All pro-
grams / Hauppauge WinTV
and
Diversity Tool
and select '
Use
Dual Tuner Mode
'. This disables
the Diversity function. Click
OK
and restart your computer for
your changes to take effect.
IEC to MCX connector
(included)
Plug your roof
top aerial to
both IEC con-
nectors
WinTV-NOVA-TD
WinTV-NOVA-T-Stick
WinTV-NOVA-T-Stick SE
Quick Installation Guide
©Hauppauge Computer Works, Inc. 2008 · QI-NOVA-T-STICK-V2.2-ENG · 2008/01/11
●
WinTV-NOVA-T-Stick
or
WinTV-NOVA-TD
unit
●
USB extension cable
(except
WinTV-NOVA-T-Stick SE
)
●
Portable TV antenna with
IEC connector (
on some models
)
●
Portable TV antenna with MCX
connector (
WinTV-NOVA-TD
only)
●
IEC to MCX connector
(
WinTV-NOVA-TD
only)
●
Antenna Y splitter (
On some models of WinTV-NOVA-TD only
)
●
IR remote control transmitter and 2 batteries (
on some models
)
●
WinTV Installation CD-ROM including
the following software components:
· New WinTV v6 application
· WinTV-Scheduler
· 7 Day EPG
· VTPlus
●
This installation guide
Contents of this WinTV package
When you run WinTV for the first
time, a message will appear ask-
ing you to scan for tuner channels
now. Please ensure that the TV
antenna is connected, click
YES
.
To start the WinTV application, double click on the
WinTV icon
.
4. New WinTV
®
v6 Application
Select your country location, for instance, select United Kingdom and
then, select Scan.
The scanning process for DVB-T will then scan for channels. When
DVB-T channels are found they then will appear in the channel listing
box.
N
ote: If you have attached an antenna and do not receive any
digital TV channels, either use a stronger antenna (a roof top
antenna is recommended for best reception) or try to add a TV
channel manually (see trouble shooting section).
Click
Close
when finished.
Increase reception on WinTV-NOVA-TD (Diversity mode)
For the best TV reception in poor conditions, you need to use the
WinTV-NOVA-TD and place the antenna in a suitable location. When
you receive at least one channel, go to the WinTV channel manager,
click on Sources and DVB-T source, to see Signal Status.
Unplug one of the antennas and move the other one to have the best
quality level in Signal Status. Unplug this antenna and plug in the
other one to now optimize this antenna. Antennas must be a slight
distant apart for best result.
Keyboard shortcuts
Sound up
- Page Up
Sound down
- Page Down
Plus (+)
- Chanel Up
Minus (-)
- Channel Down
Ctrl T
- Frame TV
Ctrl P
- Frame print
Ctrl+M
- Mute on/off
ALT+M
- Re-size TV menu
0-9
- Channel number
Space bar
- Take a snapshot
Ctrl F
- Still image
WinTV-Scheduler
allows you to schedule the recording of TV shows.
WinTV-Scheduler, once it is set, can be closed, and the WinTV applica-
tion will “wake up” at the desired time and tuned to the desired channel.
After installation, WinTV-Scheduler can be found by going to
Start / Program files / Hauppauge WinTV
.
To set up an event for timed watching or recording, click on the
Add
Program
.
5. WinTV-Scheduler
Insert your
WinTV Installation
CD-ROM
, the installation window
will automatically appear.
N
ote: If the autorun does
not start, browse to the
files on the disc and double
click on the file called 'Setup'.
In the installation window click on
Step 1
:
Install WinTV Drivers
.
A blue screen will open which will
begin installing and updating the
drivers for your product.
Once complete, a message
appears in the bar. If this message
is
Drivers have been updated
Successfully
, click on the bar to
exit. If the message reports an
error, check the connection of
your WinTV, or contact our tech-
nical support.
N
ote: If you have any anti-virus software enabled, please dis-
able it during the installation of the software.
When you attach the WinTV-
NOVA, the
Found New Hardware
Wizard
will appear.
Click on
Cancel
.
3. Install the WinTV Drivers and Applications
Snapshot Still
capture
Freeze picture
CFG
Configure Snapshot
Setup
Menu
TV Mode
Remove toolbars
no title mode
Minimise
Close
Channel surf
Channel down
Channel up
Last channel
Current TV channel
Click your right mouse
button here to see the
channel selector
Click your right mouse button
in the TV window to remove
toolbars. Click again to
restore toolbars.
Record
Playback
Volume
Always on Top
Snapshot viewer
window:
Double click on each
thumbnail to see
image full size.Click
and hold your right
mouse button to see
image options.
Pause
TV-Mode
Watch TV
Changing channels
You can change channels by using the
Channel Up
or
Channel Down
buttons on the WinTV. You can type a channel number (for example:
27) and WinTV will tune to that channel. If the entered channel does
not exist, you will see a black window.
You can also right click in the Current TV channel box, where you will
see a list of channels. Or type letters (for example: BBC) to access to
the list of the channels including these letters.
TV Mode
When you click the
Full screen TV
button, TV will appear full
screen on your PC monitor. When finished watching TV full screen,
click your right mouse button in the TV window. If you see video with
a black box around it, click the Pref button then click TV mode tab.
Check the box which says “Allow resolution change”.
"Always on top" Mode
The WinTV application will remain in view over any other applica-
tions even if it is not selected. To turn on, click the
Always on top
button. It will turn green. To turn off, click this button again.
A convenient way to use Always-on-top is to make the TV window in
the no-title mode small, and to make the TV window in the title mode
larger. Then you can switch from a small window to a larger one by
clicking the right mouse button.
Pref button
Click the
Pref
button to open the preferences menu:
View:
These are the settings for the On Screen Display of the TV
channel and Audio Volume, where you can enable Close Captions (if
supported in your system configuration), plus controls for the Toolbar
mode (Title mode), NoToolbar mode (No Title) and Full Screen (TV
mode).
Movies:
Here is where you configure some video and audio settings.
You can set the movie record directory (DVCR Record File Path).
Snapshot:
Set the size of your captured images, plus single or two
field captures for capturing motion or still image video.
Audio:
Your audio settings are configured here.
Menu button
Click the
Menu
button to open the TV setup menu. Here is the main
control bar for TV channels, and duplicate controls for other functions:
Suite-Manager:
Configure the TV tuner (scanning, channel pre set,
etc.) and setting up favourite channel lists.
Configuration:
Duplicate configuration menus for colour, audio, etc.
View:
For settings an exact TV window size: 320x240, 640x480 etc.
There are four buttons to control the watching, recording, pausing and
playback of TV. Clicking on the Pause button will cause the Pause
menu to roll down from the WinTV application, while clicking on
either the Record or Playback button will cause the Record menu to
roll down. Click the TV button will close the roll down menus to close
and for live TV to be displayed in the WinTV video window.
Pause, Record and Playback TV
Live TV
Pause
Record
Playback
Click the Playback button on the WinTV application to open the
Record and Playback control bar. Clicking the Record will automatical-
ly generate a file name and start recording your audio/video program.
If you click Record button more than once, a record timer will be set
and the recording will be done for 15 minutes for each time the
Record button is clicked. For example, if you click the button 3 times,
the WinTV will record for 30 minutes.
Functions:
●
When recording TV, the record button will depressed
●
A time counter will be shown indicating the lenght of time of the
recording
If you click
Stop
the time counter will revert back to 00:00:00
The time is specified in a
Hour:Minute:Second
format.
Stop
Clicking the
Stop
button will stop the video you are recording or
playing back.
Play
Clicking the
Play
button will playback from disk the last video file
created. When playing a video, you can rewind, fast forward, replay
10 sec or skip forward 10 sec using the buttons on the control bar.
Pause
Clicking the
Pause
button while Playing will pause your
audio/video.
Rewind
Clicking the
Rewind
button will play the video file in reverse.
Clicking the Rewind button again will continue the playing of the video.
Fast Forward
Clicking the
Fast Foward
button one time will fast foward your
video at 2X speed. Clicking the Fast Foward button two times will fast
foward your video at 8X speed. Clicking the button again will contin-
ue playing back at normal speed.
Rewind
Record
Pause
Play
Stop
Display Counter
Forward
File
Video-Position
Play forward slow
Record and Playback modes
Slow Motion
Clicking the
Slow Motion
button during playback will cause the
video to play in slow motion (at 1/2 speed). Clicking the Slow Motion
button again will return the video to normal playback speed.
File button
Clicking the File button opens the File menu. The last file record-
ed is listed in the File name box. In the File menu you can:
●
Rename your recorded video file:
To rename a video file, find the
file you would like to rename, highlight it with your mouse, and click
and hold the right mouse button. Go down to Rename and then you
can type in a new name. Remember: you must keep the MPG
extension on the file.
●
Play a video file previously recorded:
Find the file you would like to
play, highlight it with your mouse (one click of the mouse button)
and click Open. Then click the Play button.
●
Delete recorded video files which you no longer want:
Click your
right mouse button on the video file once, go down the menu and
click Delete.
Record
Play
Pause
Time counter
Pause
Video-position
Fast forward
Fast forward
Slow motion
Fast rewind
Skip forward 10 sec
TV-Mode
Pause Buffer
The Pause buffer is space on your hard disk where video is stored
during the Pause mode. The maximum amount of time which your TV
program can be delayed is dependent upon how much storage space
you have set for the Pause buffer.
Clicking the Pause button will start recording into WinTV's Replay
Buffer. It takes about 10 seconds for the Replay Buffer to be initialized
and for Pause to become effective.
Unclicking the Pause button will cause the audio/video program to
start playing from the point where the button was originally pushed.
Most WinTV functions are active while in the Pause or Pause Live
mode. For example, you can change volume, resize the TV window,
go into "no-title mode", etc.
While in Pause mode, the Video Position bar shows the amount of the
Replay Buffer which is filled with video. For example, if the Video
Position indicator shows halfway, it means that half of the Replay
Buffer is filled. If you find you cannot Pause as many minutes as you
would like, increase the size of the Replay Buffer.
While in Pause mode, the A/V stream is always saved in the Replay
Buffer. To stop saving the A/V stream in the Replay Buffer, you must
exit the Pause mode by clicking
TV mode
.
Replay
While in the Pause mode, hitting the
Replay
button acts like the
Instant Replay you see on TV broadcast sporting events: the
audio/video goes back in time and you repeat what you have previ-
ously seen. Each click of the Replay button causes audio/video to go
back 10 seconds. For example, if you want to repeat the audio/video
you saw 10 seconds ago, you would click the Replay button once. If
you want to see the video you saw one minute ago, you would need
to click the Replay button six times.
For extended replay times, you might find it more convenient to grab
the Video Position indicator control bar and move it to the left. Once
you let the control bar go, audio/video starts to play (it might take a
few seconds for the WinTV application to start playing).
You might have to move the Video Position indicator to the left and
right to find the desired spot to start replaying audio/video.
While Replaying, your audio/video program continues to be recorded
in the Replay Buffer. Therefore, if you have clicked the Replay button 3
times (so that you are replaying the audio/video seen 30 seconds
ago), the video you see in the WinTV window will be 30 seconds
behind the live program.
Skip Ahead
Clicking the
Skip
button will skip the video ahead 10 seconds.
Rewind
Clicking the Rewind button while playing video will rewind the
recorded video. Clicking the Rewind button again will continue the
playing.
Slow Motion
Clicking the Slow Motion button while playing video will play in
Slow Motion. Clicking the Slow Motion button again, will continue
playing normally.
Fast Forward
Clicking the Fast Forward button one time will fast forward your
video at 2X speed. Clicking the Fast Forward button two times will fast
forward your video at 8X speed.
Hauppauge Computer Works, Ltd.
10 Borough High Street
Bank Chambers
London, UK, SE1 9QQ
www.hauppauge.co.uk
Tech Support: (+44) 0207 378 0202
Telephone: (+44) 0207 378 1997
Fax: (+44) 0207 357 9171
[email protected]
Switching to Dual Tuner Mode
(WinTV-NOVA-TD only)
WinTV-NOVA-TD
WinTV-NOVA-T-Stick
Mute
Pause mode
The pause mode allow you to pause the Live TV picture and allows
you to use the TimeShift function to rewind and fast forward the TV.
Clicking the
Pause
button on the WinTV application starts the
Pause
mode
. The Pause Menu will drop down.
The minimum signal level to engage the Diversity mode is just 3
blocks on each antenna. When plugging the two antennas, the quality
level should then jump to the maximum.
Next, click on
Step 2: Install
WinTV
and select your language
from the list. The setup window
should appear and begin to auto-
matically install the WinTV appli-
cations.
N
ote: During the installati-
on, other installation
wizards may open, we recom-
mend following the instructions
in each of these and installing
with the default options availa-
ble.
N
ote: For advanced users
you can select the 'Custom
Installation' which will allow
you to modify the list of appli-
cations that are installed by
default.
Once the WinTV installation is complete, click
OK
then
Exit
in the win-
dow "Hauppauge WinTV Installation CD". You should now be back at
your Windows desktop.
WinTV-NOVA-T-Stick
Plug your roof top aerial or porta-
ble TV antenna into the WinTV’s
TV Connector
.
WinTV-NOVA-TD
The WinTV-NOVA-TD adopts the
revolutionary Diversity technology
which enormously improves mobi-
le reception sensitivity when used
with indoor antenna reception or
while on the move. Diversity tech-
nology use two tuners and two
antennas to create the clearest TV
signal. Plug two antennas to the
WinTV-NOVA-TD as describe here.
Plug the portable TV antenna or
your roof top aerial, using the IEC
to MCX connector, into the
WinTV’s TV MCX Connector
(WinTV-NOVA-TD only).
Plug your roof top aerial or
portable TV antenna into
the WinTV’s TV IEC
Connector.
1. Connecting the Aerial
1. Locate a free USB 2.0 port (normally located at the side or back on
the computer). Due to power and bandwidth requirements, we do
not recommend connecting the unit into a USB Hub.
2. Turn on your PC and wait until Windows has completely started.
3. Plug the WinTV-NOVA stick into the USB 2.0 port. You can use the
USB extension cable to locate the WinTV-NOVA a short distance
from the USB slot.
N
ote: If you plug the device into a different USB socket, you
may need to reinstall the WinTV-NOVA driver, but you will not
need to reload any WinTV applications.
2. Installing the WinTV-NOVA
Once in Dual Tuner mode, WinTV-NOVA-TD can record two shows at
the same time using WinTV-Scheduler and the
Record in Background
option.
The
Record in Background
option allows you to record your pro-
grams without the WinTV application present on your desktop. You
must select this option at least for one of the two recordings; indeed
the WinTV application itself cannot manage two recordings at the
same time.
When background record start; a red bullet icon close to the Windows
clock starts. You can end this record by a right click on this icon.
It is recommended that you connect to a roof top aerial
as this may pro-
vide a better signal quality then the provided portable antenna. You will
need to ensure that you are located in a area that has Digital Terrestrial
coverage. Please visit
www.dtg.org.uk/retailer/coverage.html
Sweden:
www.teracom.se
Denmark:
www.digi-tv.dk
Finland:
www.digitv.fi
Poland:
www.emitel.pl
N
ote: If you do not receive channels using the portable anten-
na, try connecting to a rooftop aerial and scan again. If you
then receive channels it means that the signal strength/quality in
your area is too low to use with the small antenna.
