6
The wireless MediaMVP will now load its
application software from the wireless net-
work. It takes approximately 2 minutes to
boot the MediaMVP network from a cold
start.
After you click
Apply
, about 15 seconds later
you will be in the main
Network Setup
menu.
Cursor to
Server Profile
and hit
OK
.
Once you are back in the Network Setup
menu, cursor to
Go
and hit
OK
.
You need to select the
Computer Name
where you have installed the MediaMVP
server software (most networks only have
one server). Chose your server and hit
OK
.
You will then see the
main MediaMVP
menu
.
Note:
If you shut down MediaMVP with the
green ‘Power’ button on your MediaMVP
remote control, the next time you turn on
MediaMVP by hitting the green ‘Power’ but-
ton, MediaMVP should start within a minute.
Note:
if you need to reboot MediaMVP,
remove the power plug from MediaMVP,
wait 5 seconds and plug it back in.
