Haulotte HA26 RTJ PRO SW, Maintenance Book

Page: 114 / 442

114 4001055180 E 06.21 USA / GB
General data
Structural part inspection
MS0001
4 - Control and maintenance
To guarantee the integrity of the machine, it is necessary to carry out periodical controls on the mechanical structure
such as defines hereafter.
4.1 - D
AILY INSPECTION
4.2 - M
AJOR INSPECTION
All structural part listed Section Familiarization must be disassembled and all weldsmust be review using
non-destructive checks
Section D - Inspection and maintenance schedule.
The criteria quoted above are applicable.
The main items to be inspected are :
• Boss welds on chassis, turret, arms, booms and jib.
• Booms and arms welds.
All the accessible structural part without disassembling must
be subjected to a fast visual inspection.
If anomalies are noted, according to the list below, a
reinforced control will have to be carried out to judge
conformity of the part :
• Absence of foreign body to the articulations and slides.
• Absence of deformation and visible damage.
• Absence of crack, broken welding, oxidation, glare of
painting.
• Absence of excessive gap to the articulations and slides.
• Check that locking device are not damaged and are
functional.
• No screws or missing part loosened or unscrew.
• Anchorage points firmly fixed and not damaged.
The list of part to check are define Section Familiarization.