background image

8

 4000827180 

E 09.18  

USA / GB

HA12CJ - HA32CJ - -

A

- Foreword

1 -  User responsibility

 1.1 -  O

WNER

'

S

 

RESPONSIBILITY

The owner (or hirer) has the obligation : 
•  To inform operators of the instructions contained in the Operator's Manual. 

•  For applying the local regulations regarding operation of the machine. 

•  To replace all manuals or decals that are either missing or not legible.  Additional copies can

be ordered from HAULOTTE Services®. 

• To establish a preventive maintenance program in accordance with the manufacturer's

recommendations, taking into account the environment and severity of use of the machine. 

• To perform periodic inspections in accordance with HAULOTTE® recommendations and

local regulations. 

All malfunctions and problems identified during the inspection shall be corrected before the
aerial work platform is returned to service. 

 1.2 -  E

MPLOYER

'

S

 

RESPONSIBILITY

The employer has the obligation : 
•  To authorize the operator to use the machine. 

•  To inform and familiarize the operator with the local regulations. 

Forbid anyone from operating the machine if : 
•  Under the influence of drugs, alcohol, etc.

•  Subject to fits, loss of motor skills, dizziness, etc.

 1.3 -  T

RAINER

'

S

 

RESPONSIBILITY

The trainer must be qualified to provide training to operators in accordance with applicable
local regulations.  The training must be given in an obstacle-free area until the trainee is
considered competent as defined by the training program undertaken. 

Summary of Contents for HA12CJ











































































































Reviews: