Haulotte HA120PX Operator'S Manual Download Page 22

Page: 22 / 94

4000327280

E09.16

USA / GB

HA120PX

- Familiarization

1.2 -

DECAL CONTENT

Decals are provided to alert the user of hazards inherent with the Aerial Work Platforms.

Decals provide the following information :

• The level of severity.

• The specific hazard.

• A method to avoid, suppress or reduce the hazard.

• Descriptive text (where required).

Familiarize yourself with the decals and the hazard severity levels.

CE and AS standards

ANSI and CSA standards

Decals must be kept in good legible condition.

Familiarize yourself with the decals and their respective color codes.

Additional decals can be ordered from HAULOTTE Services®.

Marking

Description

Hazard symbol

Level of severity

Avoidance symbol pictorial

Avoidance text

DANGER

CRUSH HAZARD

Do not stand or walk behind or in front
of the machine while in use.
Stay clear from the path of boom
rotation and platform lowering.
Failure to comply will result in death
or in serious injury

Summary of Contents for HA120PX































































































Search results

Summary of Contents for HA120PX

Reviews:

Related manuals for HA120PX

Brands by name

Popular brands

Haulotte HA120PX, Operator'S Manual

Search results

Summary of Contents for HA120PX

Reviews:

Related manuals for HA120PX

Brands by name

Popular brands