background image

Page 6

SKU 98487

For technical questions, please call 1-800-444-3353.

Connect the implement to the Quick Hitch by lowering the Lower Movement Pins 

3. 

into the inside of the hitch hooks. Lock them in place by moving both Latch Han-

dles down. See illustration below. 
Check that all connections are tight before using.

4. 

If the tractor has stabilizer arms, they will not fit into the Quick Hitch mounting 

5. 

area along with the lift arms. Use stabilizer chains, or some other longer Mount-

ing Pin (neither included) to fasten the Quick Hitch to the tractor.

Mounting non-aSae implements

If the implement does not meet ASAE specifications, use an Adapter Bracket (not 

1. 

included) to mount it to the Quick Hitch as illustrated on the next page.
Remove the Top Hook (5) by taking out the two Hex Bolts (2), Lock Washers (7), 

2. 

and Nuts (6). 
Slide the Adapter Bracket (not included) over the Top Bracket of the Quick Hitch, 

3. 

and attach with the Clevis Pin (8). Secure the Clevis Pin with the R Pin (4) .
For most implements, the front hole (closest to implement) is recommended for 

4. 

the best vertical alignment. See the illustration on page 6.
Attach the implement to the Adapter Bracket tab with a Clevis Pin (not included).

5. 

Check that all connections are tight before starting using.

6. 

Latch Handle 

Latch Handle 

Top Hook 

R Pin (4)

Lower Hook

Lower Hook

Summary of Contents for 98487










Reviews: