Page 3
SKU 96711
For technical questions, please call 1-800-444-3353.
SpeciFic SaFety ruleS
Maintain labels and nameplates on the tool. These carry important safety
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
This product is not a toy. Keep it out of reach of children.
The Hook has no safety latch. If a load bounces or the pull on the connection
is not constant, the load may be disconnected. Only use the Hook to pull even,
stable loads on flat, level ground.
Be aware of dynamic loading! Suddenly starting or jerking against load may
briefly create excess load causing product failure.
The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SaVe theSe inStructionS.
SpeciFicationS
Fits
2” Square Receivers
Maximum Gross Trailer
Weight Capacity
2-5/16” Diameter Ball: 10,000 Pounds
2” Diameter Ball: 5,000 Pounds
1-7/8” Diameter Ball: 3,500 Pounds
Hook: 7,500 Pounds
Hitch Pin Holes
Two 5/8” Diameter Holes
unpackinG
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
Set up inStructionS
read the entire important SaFety inFormation section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
note:
For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
1.
2.
3.
4.
5.
