Page 4
For technical questions, please call 1-800-444-3353.
SKU 92626
14. The warnings, precautions,
and instructions discussed in
this instruction manual cannot
cover all possible conditions and
situations that may occur. It must
be understood by the operator that
common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE
INSTRUCTIONS.
SPECIFICATIONS
Weight Capacity 2000 lb.
Jack Lift
15”
Installation
Bolt on or Weld on Mounting
Handle
Rotates 360 degrees
Height
24-1/4”
UNPACKING
When unpacking, make sure item
is intact and undamaged. If parts are
missing or broken, call Harbor Freight
Tools at 1-800-444-3353.
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note:
For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Installation
1. Secure the unloaded trailer with
wheel chocks (blocks) on a hard, flat
surface capable of supporting the
weight of the trailer, trailer jack and
required tools.
2. Raise the trailer tongue and secure it
with two supports, one on each side
of the trailer tongue.
3. This Trailer Jack is designed
specifically for use with an A-frame
hitch.
Never attempt to mount
this Trailer Jack to a hitch or trailer
Specifications
Installation / Assembly
