#38897 Page 5
Figure 5
Step 5:
Bolt the Wheel Axle Supports (#4) to the
Bottom Panels (#1) using 8 Bolts (#21), 8 Washers
(#23), and 8 Nuts (#24) - see Figure 5
Figure 6
Figure 7
Step 6:
As shown in Figure 6, put the Hitch Tongue in place and insert the Wheel Axle (#5) throught the Wheel
Axle Support (#4). Install the 2 Wheel/Tire Assemblies (#6) with Washers (#26) and Cotter Pins (#27).
Step 7:
As shown in Figure 7, insert the Tongue Latch (#9)
up through the opening in the Hitch Tongue (#10). Using
a Latch Spacer (#8) on each side of the Tongue Latch, bolt
the Latch Spacer to the Hitch Tongue using Bolt (#29) and
Nut (#30). Only hand tighten this bolt for now.
Attach one end of the Latch Spring (#7) to the
opening in the Hitch Tongue (#10) and the other end
to the top hole in the Latch Spacer (#8). With the
Latch Spring in place, tighten the bolt described
in the above paragraph.
Wheel Axle (#5)
Wheel/Tire
Assembly (#6)
Hitch Tongue (#10)
Tongue Latch (#9)
Latch Spacer (#8)
Latch Spring (#7)
Hitch Tongue (#10)
REV 02/07