Haug EN 8 LC, Operating Instructions Manual

Page: 12 / 24

5 Operate
12
5 Operate
Preconditions:
The discharging power pack and the ionizing unit are connected and
installed as specified in the operator instructions.
1. Switch on the discharging power pack using the mains switch.
• The signalling lamp will light up briefly to confirm.
• The mains switch will illuminate to confirm.
• The HV is switched on.
2. The discharging power pack is in operating mode.
3. The signalling lamp does not light up during operation.
NOTE:
In the event of a fault, the signalling lamp flashes to indicate this
status. Carry out chapter troubleshooting. Refer page 13.