Operating instructions AG 35
AG35 v01gb
Page 9
7
Maintenance and repairs
Danger!
High voltage!
Danger of fatal accidents!
Do not open unit!
This unit does not include any parts which can be maintained or repaired by the operator. HAUG
only is authorized to repair or calibrate the unit.
Should the unit prove defective or if a defect is suspected, switch off unit immediately and secure
against subsequent reuse.
7.1
Changing the fuse
1.
Switch off unit.
2.
Determine and remove the cause of the blown fuse.
3.
Detach the fuse holder using a screwdriver and lift out.
4.
Replace fuse and reattach fuse holder.
Use the following fuses only:
Unit type
Fuse charging
Fuse discharging
115 V pos./neg.
0,50 A slow; 5x20 mm
0,50 A slow; 5x20 mm
230 V pos./neg.
0,25 A slow; 5x20 mm
0,25 A slow; 5x20 mm
The unit type and the rated voltage are indicated on the nameplate.
Only use fuses of the type indicated.
