16
Art. Nr.: 5090020213
Rev.: 00 /2018-01-30
3 General information and intended use
4
Safety
According to their intended use, our products have been designed exclusively for installation in buildings
made from state-of-the-art construction materials. We do not accept liability for use deviating from
or beyond this unless our express written confi rmation has been obtained in advance.
For warranty conditions, please see our current General Terms and Delivery Conditions.
The individual press seal with integrated test valve is for testing impermeability directly after in-
stallation. Available in closed or partitioned design to seal cables that are to be newly installed or
have already been installed. The sealing is manufactured to customer specifi cations – for example
eccentric, with overlying fl ange or for multiple and mixed assignment.
This section provides an overview of all the main safety aspects for optimum protection of person-
nel and a safe installation process.
If there is a failure to observe the instructions and safety information set out here, this may result in
signifi cant hazards.
The installation of the individual press seal with integrated test valve must comply with the
relevant professional association regulations, VDE provisions, national safety and accident pre-
vention regulations as well as company regulations (work and procedural instructions).
The fi tter must wear the relevant protective clothing.
Only intact components may be installed.
4�1 Explanation of symbols
1
Work stages
Reference numerals in drawings
1
►
Effect/result of a work step
Warnings are indicated in these assembly instruction by means of symbols. The warnings are preceded
by signal words which show the extent of the hazard. It is imperative to observe the warnings and
act with care so as to avoid accidents, bodily harm and damage.
4�2 Warnings
DANGER!
… indicates a direct hazard which can result in death or severe injury if not avoided.
HRD (D)-2PV(G)-z/d
Press seal with test valve.
EN
