2-4L41C, 2-4M41(Z), 4L42C, 4M42
Safety
HATZ
15
Manual
3.2.2
Machine-specific safety instructions for operation
Introduction
The machine can pose residual risks during operation. To eliminate these
risks, all persons working on the machine must follow the general and ma-
chine-specific safety instructions.
If you have an engine that is not yet installed in a machine, it is imperative
that you follow the
Assembly Instructions for HATZ Diesel Engines
be-
fore installing the engine.
These assembly instructions contain important information on safe installa-
tion.
If the engine is installed in a machine or assembled with other machines to
form a machine, it is prohibited to start the engine before it has been deter-
mined that the newly created machine fulfills all safety-related requirements
and applicable legal regulations.
Safe operation
▪ Before switching on the machine, ensure that no one can be injured when
the machine is started up.
▪ During machine operation, ensure that unauthorized persons do not have
access to the area in which the machine has an impact.
▪ Parts of the exhaust gas system and the surface of the engine become hot
during operation. Risk of injury from touching hot parts! Let the engine cool
before maintenance.
▪ Do not refuel during operation.
Faults
▪ Immediately eliminate faults that compromise safety.
▪ Switch off the machine and do not take into service again until all faults
have been eliminated.
Safety instructions for operation
DANGER
Danger to life from inhaling exhaust gases.
Toxic engine exhaust gases can lead to loss of consciousness
and even death in closed-off and poorly ventilated rooms.
▪
Never operate the machine in closed-off or poorly ventilated
rooms.
▪
Do not breathe in the exhaust gases.
Summary of Contents for 2-4L41C
Page 2: ......
