- 13 -
Panel buttons and function
s
START button:
Press “Start” button, the system will count down
in 3 seconds, which displays on the screen! The
machine will run at the speed of 1.0km/h.
STOP button:
Press this button to stop the running machine.
Reset:
Press “Stop” button twice continuously to reset
the machine.
PROG. button
In ready condition, press “PROG” button to select
programs from P1-P99, U1-U3 and FAT.
P1-P99 are built-in programs. U1-U3 are user-
defined programs. FAT is body-fit program.
After finish selection, press “Start” button to
start the machine!
MODE button
In ready condition, press “MODE” button to select
from Time, Distance and Calories count-down
modes.
After finish selection, press “Start” button to
start the machine!
SPEED
△
▽
button
In ready condition, buttons are used to adjust
preset-data.
In running condition, buttons are used to adjust
speed, and the adjusting range is 0.1km/h each
time. Keep pressing buttons for over 0.5 second,
the speed will continuously increase or decrease.
SPEED direct button
In running condition, press these buttons to set
the speed to be 3km/h, 6km/h and 9km/h
directly.
