19
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend you use a silicone based spray to lubricate your Treadmill. This can be
purchased from your local sports Retailer or a local hardware store.
Identification ways for the degree of tightness of running belt and poly V-belt.
When the running belt skips, please follow the steps as follows to make sure which belt
needs to be adjusted, running belt or poly V-belt.
a)
Cut off power, screw off the bolt on cover of protection. Then take down the protecting cover
from the treadmill
b)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to
make the running belt stop. If running belt stops, together with the front roll, but the motor still runs,
under this condition, it means the poly V-belt needs to be adjusted.
c)
Turn the speed to be around 3km/h, step on the running belt by pressure and try your best to
make the running belt stop. If running belt stops, but front roll still runs, under this condition, it
means the running belt needs to be adjusted.
The adjustment steps for poly V-belt
Cut off power firstly and take down the cover of protection.
a)
Loosen the four screws for the motor, adjust them in a circuit clockwise, then screw down the
loose screws.
b)
Keep the power on, and adjust the poly V-belt is loose or not following the point 3.1 above, if
yes, please repeat the action same to point a) above.
Running board lubrication
The treadmill is equipped with lubricated running board, which needs constant maintenance. The friction
between running board and running belt has a great effect on the treadmills’ e life. So
please lubricate your machine termly. The steps are as follows:
a)
Cut off the power
b)
Wipe out the dust between running board and running belt with a clean cloth.
c)
Daubing the Silicon oil on the running board and running belt equably.
d)
While adding lubrication oil, please keep your clothes away from the machine for avoiding the injury.
