Hatterland Display JH 15T15 MMD-xxx-Axxx, User Manual, Page: 22 / 96

Physical Connections - MMD Based Models
22
INB100036-1 (Rev 9)
IND100133-32
DVI-I IN:
Connect your DVI cable to the DVI-I 29P Connector (female). The DVI-I connector can function as
regular RGB IN by using a DVI-I > RGB/VGA adapter. Secure the DVI cable to the hex spacers
provided on the unit and make sure you do not bend any of the pins inside the connector.
Connect the other end of the cable to the DVI connector on your equipment and secure it.
Important note for DVI signal detection:
Please note that for the operating system to detect DVI signals correctly, the DVI cable MUST be connected physically
to the display unit during boot up otherwise you may experience a black image. Furthermore certain graphics drivers
may need to refresh their device list (often done manually by user - detect devices), while in some cases the
Plug-n-Play will automatically detect the DVI signal correctly. Please consult your local technician if you have this
behaviour of detection problems when using DVI. In all cases the problem can be solved in the operating system, and
this is not a malfunction in the graphic controller for HATTELAND® units.
POWER INPUT: (For models supporting AC input)
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input.
Please check specifications for your product.
POWER OUTPUT: (For models supporting AC output)
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input.
Please check specifications for your product.
POWER INPUT: (For models supporting DC input)
Connect your DC power cable to the 2P Amphenol FCC17 D-SUB Connector (male). Secure the
cable to the hex spacers provided on the unit, and secure the other end to your power supply.
The internal DC power module supports 24VDC. Please check specifications for your product.