Hatterland Display JH 15T15 MMD-xxx-Axxx, User Manual, Page: 20 / 96

20
INB100036-1 (Rev 9)
IND100078-17
General Installation Recommendations
Installation
HATTELAND® Multifunction Cables
This custom HATTELAND® Multifunction Cable with
its 160 pins offers a wide range of additional signal
types to be used togther with the display units.
Please refer to the Contents of Package in this
manual to determine which cable and connector
functionality you received.
The cable could also be customized upon customer request for length or to support other signal
types and connectors. Using any other cable/housing design to connect to the display units could
result in severe damage to components! Please use it only with HATTELAND® display products
as specified in this manual.
Standard Bracket
When mounting the bracket, the length of the bolts should not
exceed 12mm. Using any longer is not possible as the mounting
holes on the unit is designed to protect the electronic boards inside.
Mount bolts on each side of the unit.
Make any adjustments before securing the bolts.
Adjust the tilting angle and secure the bolts.
Rotary Bracket
This can only be mounted if the unit is equipped with a standard bracket. Use the provided bolts
to secure the rotary bracket.
You may choose your own bolts to secure it to a table or
desktop, recommended size are: M10 and minimum 30mm in
length. The rotary bracket can be rotated 180°