16
IND100241-2
INB100011-1 (Rev 4)
Pin Assignments - Common Connectors
17
IND100241-2
INB100011-1 (Rev 4)
Pin Assignments - 25P Parallel
Pin 01 - STROBE
This signal indicates to the printer that data at PD7..0 are valid.
Pin 02 - DATA0
Parallel data bus from PC board to printer. The data line are able to operate in PS/2 compatible bi-directional mode.
Pin 03 - DATA1
Same as Pin 02
Pin 04 - DATA2
Same as Pin 02
Pin 05 - DATA3
Same as Pin 02
Pin 06 - DATA4
Same as Pin 02
Pin 07 - DATA5
Same as Pin 02
Pin 08 - DATA6
Same as Pin 02
Pin 09 - DATA7
Same as Pin 02
Pin 10 - ACK
Signal from printer indicating that the printer has received the data and is ready to accept further data.
Pin 11 - BUSY
Signal from printer indicating that the printer cannot accept further data.
Pin 12 - PE
Signal from printer indicating that the printer is out of paper.
Pin 13 - SELECT
Signal from printer to indicate that the printer is selected.
Pin 14 - AUTO FEED
This active low output causes the printer to add a line feed after each line printed.
Pin 15 - ERR#
Signal from printer indicating that an error has been detected.
Pin 16 - INIT#
This active low output initialises (resets) the printer.
Pin 17 - SLIN#
Signal to select the printer sent from CPU board to printer.
Pin 18 - GND
Ground
Pin 19 - GND
Ground
Pin 20 - GND
Ground
Pin 21 - GND
Ground
Pin 22 - GND
Ground
Pin 23 - GND
Ground
Pin 24 - GND
Ground
Pin 25 - GND
Ground
13 12 11 10 9 8 7 6 5 4 3 2 1
25 24 23 22 21 20 19 18 17 16 15 14
Pin Assignments - 24P DVI-D
Pin 01
T.M.D.S. Data2 -
Pin 02
T.M.D.S. Data2 +
Pin 03
T.M.D.S. Data2/4 Shield
Pin 04
T.M.D.S. Data4 -
Pin 05
T.M.D.S. Data4 +
Pin 06
DDC Clock
Pin 07
DDC Data
Pin 08
Not Connected
Pin 09
T.M.D.S. Data1 -
Pin 10
T.M.D.S. Data1 +
Pin 11
T.M.D.S. Data1/3 Shield
Pin 12
T.M.D.S. Data3 -
Pin 13
T.M.D.S. Data3 +
Pin 14
+5V Power
Pin 15
Ground (for +5V)
Pin 16
Hot Plug Detect
Pin 17
T.M.D.S. Data0 -
Pin 18
T.M.D.S. Data0 +
Pin 19
T.M.D.S. Data0/5 Shield
Pin 20
T.M.D.S. Data5 -
Pin 21
T.M.D.S. Data5 +
Pin 22
T.M.D.S. Clock Shield
Pin 23
T.M.D.S. Clock +
Pin 24
T.M.D.S. Clock -
DDC = Display Data Channel
T.M.D.S = Transition Minimized Differential Signal
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
Summary of Contents for JH 12T01 MMC
