Hatteland JH 12T01 MMC, User Manual

Page: 15 / 36

14
INB100011-1 (Rev 4)
IND100133-9
15
INB100011-1 (Rev 4)
IND100133-9
Power INPUT: (AC or DC Model)
AC MODEL ONLY: The internal AC power module supports both 115VAC/60Hz and 230/50Hz power input.
DC MODEL ONLY: Secure the cables (check polarity!) to the screw terminal. The internal DC power
module supports voltage from 12 to 24 VDC.
USB INPUT/OUTPUT:
Connect any USB 1.1 compliant peripherals into either of these two USB connectors. Drivers for most USB
devices are useally included in operating system or on separate installation CD’s delivered with product.
USB 2.0 devices will operate in USB 1.1 mode (12 Mbps)
CompactFlash Reader:
CompactFlash Reader supports Type I & II cards. Insert the card gently into the slot with the logo facing
towards the TFT display). The drive letter assigned within the operating system will be automatically
unassigned when the card is removed from the slot. The card is removed by pulling the factory mounted
sticker extension away from the slot. This card & sticker is factory installed upon customer request.
Network INPUT/OUTPUT:
Supports 10/100Mbps Ethernet. Suitable for twisted pair cables CAT.5E. Make sure the network cable
connector ”clicks” into the RJ-45 connector.
COM1 Serial Port INPUT/OUTPUT:
Supports RS232/RS422/RS485 using a D-SUB 9P Male connector. Fasten the cable to the connector using
the provided screws on the cable housing itself.
RGB OUTPUT:
Will output a clone signal from the computer for use with external display or monitor. Connects via a
High Density D-SUB 15P Female connector. Fasten the cable to the connector using the provided screws
on the cable housing itself.
Physical Overview - JH 12T01 MMC
Connector area of computer
RGB OUT Network
Power Input
PS/2 Mouse+Keyboard (Same as in front)
USB 0,1
COM1
CompactFlash Reader