manualshive.com logo in svg

Hatteland HD 12T21 MMD-xxx-Fxxx Series, User Manual

Share
Download
Hatteland HD 12T21 MMD-xxx-Fxxx Series User Manual Download Page 73

73

User Controls

OSD Menu Functions

IND100064-38

|---2--- 

Service

 - Test Pattern

 

Will show the internal test pattern with greyscales, colors and raster patterned boxes to check for

 

deviations in the TFT panel/display controller behaviour. It is independent of any current resolution

 

or specifications found in the signal inputs. The test pattern is generated internally in the display

 

controller and is sent 1:1 directly to the TFT panel. It can be useful during trouble-shooting 

 

situations to determine the source of a display or connectivity problem regarding external

 

equipment. 

 

To active this function, touch the “MENU” button.

 

 

● Note: This function will not inform/report any deviations directly, you need to have the required technical

 

 

   expertise to interpret the test pattern displayed.

|---2--- 

Service

 - Burn In

 

Sets the unit into “Burn In” mode and enables to write EDID data. More information to follow.

Summary of Contents for HD 12T21 MMD-xxx-Fxxx Series







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands