Hatteland HD 08T21 STD-xxx-F Series, User Manual

Page: 23 / 40

23
INB100535-2 (Rev 1)
IND100129-153
Specifications - HD 13T21 STD-xxx-Fxxx
Note: All specifications are subject to change without prior notice!
2/2
PRODUCT SPECIFICATIONS - HD 13T21 STD-xxx-Fxxx
• 13.3 inch TFT Liquid Crystal Display module
• Widescreen, Aspect Ratio 16:10
• a-si TFT Active Matrix
• CCFL Backlight
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects on chosen source
• Video Signal : Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal : 24 kHz to 81 kHz
• Vertical : 50 Hz to 75 Hz*
* 60Hz is recommended for optimal picture quality
• 355.00 (W) x 248.50 (H) x 58.00 (D) mm
• 13.98" (W) x 9.78" (H) x 2.28" (D)
• Compatible VESA mounting 75mm, 4xM4 VESA mounting, Max 8mm deep
• Built-in Console mounting 4 x M5x15mm screws
• Weight: TBD kg (approx)
• TBD
• Operating : Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage : Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating : Protection: IP66 front - IP22 rear (EN60529)
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Resolutions:
• WVGA : 640 x 480 (including 720 x 400)
• WSVGA : 800 x 600
• WXGA : 1024 x 768, 1280 x 800*
* Recommended for optimal picture quality
Power Supply:
• 2 x 24VDC : Model HD 13T21 STD-Exx-Fxxx
Dual input, galvanic isolated, automatic switch between power source
Power Consumption:
• Operating : 20W (typ) - 30W (max)
• DVI-I Signal IN : 1 x 29p DVI Female (or as RGB IN with adapter)
• Touchscreen : 1 x USB TYPE B Connector (female)
• DC Power IN : 2 x SL-SMT 90F (1 x 2 pole)
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, Brightness Control (-/+), Light Sensor (not visible)
• Programmable Alarm LED, Buzzer (not visible)
• Native Resolution : 1280 x 800 (WXGA)
• Pixel Pitch (RGB) : 0.2235 (H) x 0.2235 (V) mm
• Response Time : 6/10ms (typical) (Tr/Tf)
• Contrast Ratio : 800:1 (typical)
• Light Intensity : 400 cd/m2 (typical)
• Viewable Angle : 70 deg (H) 60 deg (V) (typical)
• Active Display Area : 286.08 (H) x 178.8 (V) mm
• Max Colors : 16.7 million
TFT Technology:
Synchronization:
Physical Considerations:
Available Accessories:
Environmental Considerations:
Supported Signals:
Power Specifications:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002) (pending) IACS E10 (pending) ClassNK - Nippon Kaiji Kyokai (pending)
GL - Germanischer Lloyd (pending) DNV - Det Norske Veritas (pending) ABS - American Bureau of Shipping (pending)
BV - Bureau Veritas (pending) LRS - Loyd’s Register of Shipping (pending)
Signal Terminals:
User Controls:
TFT Characteristics:
Compass Safe Distance: HD 13T21 STD-xxx-Fxxx Standard: 80cm Steering: 45cm
MTBF (Mean Time Between Failures - MIL-HDBK-217 GB 25
º
C) = TBD hours
• Optical Bonding Technology
• Sunlight Readable / High Bright (includes Optical Bonding) model *
Factory Mounted Options:
• HD 13T21 STD-EA1-FAGP = Dual DC, GDC, Buzzer, PCTouch
• HD 13T21 STD-EA1-FOGP = Dual DC, Optical Bonding Technology, GDC, Buzzer, PCTouch
Available Standard Models:
For a full overview of typenumbers, please review the following link:
www.hatteland-display.com/pdflink/ind100780-3.php
* Release date to be con rmed. Please contact us for more information.