Hatsan USA TactAir Volt, Operation Manual

Page: 5 / 12

5
1. POWER REQUIREMENTS
NOTE: The fuse size listed is the recommended size for a dedicated inline fuse.
If using a fused power source, verify that it is capable of handling the indicated amperage in addition to any other existing loads!
WARNING: DO NOT OPERATE THIS COMPRESSOR IF THE SYSTEM VOLTAGE IS BELOW 12V!
Power Source Power Source Connection Fuse Size
12-14V DC Alligator Clamp to Yellow Connector 40A
115V AC Outlet Wall Plug to Black Connector 7.5A
230V AC Outlet Wall Plug to Black Connector 4A
Additional Information
Flow Rate 0.25 CFM (0.007 m³/min)
2. PARTS OF YOUR COMPRESSOR