![background image](http://html1.mh-extra.com/html/hatco/pmgh-60/pmgh-60_installation-operating-service-and-parts-manual_2107122003.webp)
Form No. PMGH-60M-0405
1
MODEL DESCRIPTION
ALL MODELS
The Flue Gas Diverter Hood is designed to sit
directly on top of the PMG-60 Booster Water Heater.
It will collect the flue gases that exit the PMG-60 unit
and direct them through a 4" (102 mm) diameter
pipe to a location within the same room up to 20
linear feet (6 m) away from the unit.
NOTE: One elbow equals 5 linear feet (1.5 m).
All Hatco booster heater accessories are warranted
to be free of defects in material and workmanship
under normal use and service, and when installed in
accordance with factory recommendations.
NOTE: Hatco Booster Water Heaters are approved
for use with commercial dishwashers only.
Figure 1. Model PMGH-60