Hatco MDX-1X Installation And Operating Manual Download Page 3

IMPORTANT SAFETy INFORMATION

Form No. MDWM-0311

3

ELECTRIC SHOCK HAzARD:

• Plug unit into a properly grounded electrical receptacle

of the correct voltage, size, and plug configuration. If

plug and receptacle do not match, contact a qualified

electrician to determine and install the proper voltage

and size electrical receptacle.

• Turn OFF power switch, unplug power cord, and allow

unit  to  cool  before  performing  any  cleaning,

adjustments, or maintenance.

• DO NOT submerge or saturate with water. Unit is not

waterproof. Do not operate if unit has been submerged

or saturated with water.

• Unit  is  not  weatherproof.  Locate  unit  indoors  where

ambient air temperature is a minimum of 70°F (21°C)

and a maximum of 85°F (29°C).

• Do not steam clean or use excessive water on unit.
• This unit is not “jet-proof” construction. Do not use jet-

clean spray to clean this unit.

• Do not pull unit by power cord.
• Discontinue use if power cord is frayed or worn.
• Do not attempt to repair or replace a damaged power

cord. Cord must be replaced by Hatco, an Authorized

Hatco  Service  Agent,  or  a  person  with  similar

qualifications.

• Do not clean unit when it is energized or hot.
• Do not allow liquids to spill into the unit.
• This unit must be serviced by qualified personnel only.

Service by unqualified personnel may lead to electric

shock or burn.

• Use  only  Genuine  Hatco  Replacement  Parts  when

service  is  required.  Failure  to  use  Genuine  Hatco

Replacement  Parts  will  void  all  warranties  and  may

subject  operators  of  the  equipment  to  hazardous

electrical voltage, resulting in electrical shock or burn.

Genuine  Hatco  Replacement  Parts  are  specified  to

operate safely in the environments in which they are

used. Some aftermarket or generic replacement parts

do not have the characteristics that will allow them to

operate safely in Hatco equipment.

FIRE HAzARD: Locate unit a minimum of 1″ (25 mm) from

combustible walls and materials. If safe distances are not

maintained, discoloration or combustion could occur.

Use  only  light  bulbs  that  meet  or  exceed  (National

Sanitation Foundation (NSF) standards and are specifically

designed for food holding areas. Breakage of light bulbs

not specially coated could result in personal injury and/or

food contamination.

WARNING

Read the following important safety information before using this equipment to avoid serious injury or death and

to avoid damage to equipment or property.

Make sure all operators have been instructed on the safe

and proper use of the unit.

This unit is not intended for use by children or persons

with  reduced  physical,  sensory,  or  mental  capabilities.

Ensure proper supervision of children and keep them away

from the unit.

Hatco Corporation is not responsible for the actual food

product serving temperature. It is the responsibility of the

user to ensure that the food product is held and served at

a safe temperature.

Make sure food product has been heated to the proper food-

safe temperature before placing in unit. Failure to heat food

product properly may result in serious health risks. This unit

is for holding preheated food product only.

This  unit  has  no  “user-serviceable”  parts.  If  service  is

required on this unit, contact an Authorized Hatco Service

Agent  or  contact  the  Hatco  Service  Department  at 

800-558-0607  or  414-671-6350;  fax  800-690-2966;  or

International fax 414-671-3976.

BURN HAzARD: Some exterior surfaces on the unit will get

hot. Use caution when touching these areas.

Locate unit in an area that is convenient for use. The loca-

tion  should  be  level  and  strong  enough  to  support  the

weight of the unit and contents.

Transport unit in upright position only. Failure to do so may

result in damage to unit or personal injury.

Do not lay unit on the side with the control panel or damage

to the unit could occur.

Use non-abrasive cleaners only. Abrasive cleaners could

scratch the finish of the unit, marring its appearance and

making it susceptible to soil accumulation.

Clean  unit  daily  to  avoid  malfunctions  and  maintain

sanitary operation.

This unit is intended for commercial use only — NOT for

household use.

WARNING

CAUTION

NOTICE

Summary of Contents for MDX-1X

















Reviews: