Form No. IWRMM-0119
4
IMPORTANT SAFETY INFORMATION
All Models
Hatco Induction Warmers are equipped with a single
induction coil underneath a ceramic glass surface. Each
model features a control panel with a On/Off Button,
Temperature Control Arrow Buttons, and Temperature Setting
Indicators. All Induction Warmers include either an attached
71″ (1800 mm) power cord with plug or a detachable 71″
(1800 mm) power cord with plug.
NOTE: Refer to “Pan Specifications” in the
OPERATION
section
of this manual for details on “induction-ready” pans,
pans not suitable for induction warming, and pan sizes.
Hatco Induction Warmers have several safeguards built into
each unit that ensure protection to the unit as well as the
operators.
• A fan-driven ventilation system ensures that the electronic
circuits in the unit do no overheat. Temperature probes
monitor the electronic circuits and will signal the unit to
shut down if the circuits get too hot.
• A temperature probe in the warming zone monitors the
zone temperature. This probe detects overheating in the
warming zone due to an empty pan.
• Electronic circuitry in the warming zone detects when a
small, ferrous object (such as a fork, spoon, or ring) is
placed on the unit, and the unit will not operate.
Countertop Models
Countertop Induction Warmers are portable, countertop
Induction Warmers. They are available as standalone units or
as “daisy-chain” units.
Model IWRM-C1-1317-06
Model IWRM-C1-1317-06 Induction Warmers are standalone
units with an attached power cord and plug.
Ceramic
Glass
Surface
On/Off
Button
Temperature Control Arrow Buttons
Temperature Setting Indicators
Model IWRM-C1-1317-06
Model IWRM-CD1-03
Model IWRM-CD1-03 Induction Warmers are low wattage,
daisy chain units with a detachable power cord with plug. Using
the included 17″ (432 mm) jumper power cord, up to five of
these models can be connected together off of one electrical
receptacle (see OPTIONS AND ACCESSORIES for additional
jumper power cords).
NOTE: For Canadian units, a total of four units can be
connected together off of one electrical receptacle.
Ceramic
Glass
Surface
Detachable
Power Cord
On/Off
Button
Temperature Control Arrow Buttons
Jumper
Power Cord
Temperature Setting Indicators
Model IWRM-CD1-03
Built-In Models
Built-In Induction Warmers are designed to be installed into a
variety of solid material countertops. The unit includes a remote
control panel that connects to the Induction Warmer with a
detachable 39″ (1000 mm) control cable.
Ceramic Glass
Surface
Power Cord
Remote
Control
Panel
Control
Cable
Model IWRM-B1-1313-06
MODEL DESCRIPTION
NOTICE
Do not place objects with magnetic properties (credit cards,
cassette tapes, etc...) on or near unit during operation.
Use only wipes, pads, and cleaners designed specifically
for cleaning ceramic glass surfaces.
Use non-abrasive cleaners and cloths only. Abrasive
cleaners and cloths could scratch finish of unit, marring its
appearance and making it susceptible to soil accumulation.
NOTICE
Do not locate unit in area with excessive air movement
around unit. Avoid areas that may be subject to active air
movements or currents (i.e., near exhaust fans/hoods, air
conditioning ducts, and exterior doors).
This unit is intended for commercial use only—NOT for
household use.
