background image

Form No. IRNGM-0516

3

IMPORTANT SAFETY INFORMATION

WARNING

ELECTROMAGNETIC  INTERFERENCE HAZARD: This 

unit generates close-range electromagnetic fields. It has 

been designed to meet the applicable standards for non-

interference with other electronic devices. Make sure other 

electronic devices in the vicinity, including pacemakers 

and other active implants, have been designed to meet 

their corresponding applicable standards. As a precaution, 

do not operate unit or come within 12ʺ (305 mm) of unit 

with a pacemaker or other active implant.
This unit is not intended for use by children or persons 

with reduced physical, sensory, or mental capabilities. 

Ensure proper supervision of children and keep them away 

from unit.
Make sure all operators have been instructed on the safe 

and proper use of the unit.
This unit has no “user-serviceable” parts. If service 

is required on this unit, contact an Authorized Hatco 

Service Agent or contact the Hatco Service Department at  

800-558-0607 or 414-671-6350.

CAUTION

BURN HAZARD: 

  • Do not leave metal objects or utensils on or near 

induction range. They may become hot.

  •  Use caution when wearing rings, watches, or other 

ferrous objects around induction range. They may 

become hot.

  •  Some exterior surfaces on unit will get hot. Use caution 

when touching these areas.

Do not block or restrict air flow to air intake or exhaust 

openings on bottom of unit.
Do not store anything on top of unit.
Locate unit at proper counter height in an area that is 

convenient for use. Location should be level to prevent 

unit or its contents from falling accidentally and strong 

enough to support weight of unit and contents.

NOTICE

Plug unit into a dedicated, 15 A circuit. Do not use multiple 

appliances on same circuit.
Never use aluminum foil on induction range. Aluminum foil 

will melt and damage unit.
Do not place objects with magnetic properties (credit cards, 

cassette tapes, etc...) on or near unit during operation.
Use only wipes, pads, and cleaners designed specifically 

for cleaning ceramic glass surfaces. 
Use non-abrasive cleaners and cloths only. Abrasive 

cleaners and cloths could scratch finish of unit, marring its 

appearance and making it susceptible to soil accumulation.
This unit is intended for commercial use only—NOT for 

household use.

WARNING

ELECTRIC SHOCK HAZARD:

  •  Plug unit into a properly grounded electrical receptacle 

of the correct voltage, size, and plug configuration. If 

plug and receptacle do not match, contact a qualified 

electrician to determine and install proper voltage and 

size electrical receptacle.

 • Turn OFF power switch, unplug power cord, and 

allow unit to cool before performing any cleaning, 

adjustments, or maintenance.

  •  DO NOT submerge or saturate with water. Do not allow 

liquids to spill into unit. Unit is not waterproof. Do not 

operate if unit has been submerged or saturated with 

water.

  •  Unit is not weatherproof. Locate unit indoors where 

ambient air temperature is a minimum of 70°F (21°C).

  •  Do not steam clean or use excessive water on the unit.
  •  This unit is not “jet-proof” construction. Do not use 

jet-clean spray to clean this unit.

  •  Do not clean unit when it is energized or hot.
  •  Do not pull unit by power cord.
  •  Discontinue use if power cord is frayed or worn.
  •  Do not attempt to repair or replace a damaged power 

cord. Cord must be replaced by an Authorized Hatco 

Service Agent or a person with similar qualifications.

  •  This unit must be serviced by qualified personnel only. 

Service by unqualified personnel may lead to electric 

shock or burn.

  • Use only Genuine Hatco Replacement Parts when 

service is required. Failure to use Genuine Hatco 

Replacement Parts will void all warranties and may 

subject operators of the equipment to hazardous 

electrical voltage, resulting in electrical shock or burn. 

Genuine Hatco Replacement Parts are specified to 

operate safely in the environments in which they are 

used. Some aftermarket or generic replacement parts 

do not have the characteristics that will allow them to 

operate safely in Hatco equipment.

FIRE HAZARD:

  •  Locate unit a minimum of 2″ (51 mm) from combustible 

walls and materials. If safe distances are not 

maintained, discoloration or combustion could occur.

  •  Do not obstruct air ventilation openings on bottom of 

unit. Unit combustion or malfunction may occur.

  •  Do not place unit near or underneath curtains or other 

combustible materials. Items near or above unit could 

catch fire causing injury and/or damage to unit.

EXPLOSION HAZARD: Do not heat unopened containers 

of food on unit. Sealed, heated containers may burst open.

Read the following important safety information before using this equipment to avoid serious 

injury or death and to avoid damage to equipment or property.

Summary of Contents for IRNG-PC1-14













Reviews: