![Hatco HEATMAX RHW-1 Operating Manual Download Page 8](http://html1.mh-extra.com/html/hatco/heatmax-rhw-1/heatmax-rhw-1_operating-manual_2106682008.webp)
Form No. RHWm-1215
8
English
General
Use the following procedure to operate the Round Heated
Wells.
Read all safety messages in the IMPORTANT SAFETy
INFORMATION section before operating this equipment.
Do not operate unit without food product/water in well.
Damage to unit could occur.
NOTE: For proper heat transfer, operate the RHW series,
(Round Heated Wells), with the special pan supplied.
This pan has a curved bottom to match the shape of
the heating element.
1. Plug the unit into a properly grounded electrical outlet of
the correct voltage, size, and plug configuration. See the
SPECIFICaTIONS section for details.
• The Power Indicator (
) will glow red when the unit
has power.
2. Place a pan/pot filled with food product or water into the
unit.
NOTE: Do not operate the unit without a food pan or with an
empty/dry pan. The unit will overheat and go into
FaulT mode.
3. Press the On/Off Button (
) to turn on the unit.
• The Power Indicator (
) will glow green when the unit
is on and heating.
NOTE: The Fault Indicator
(
)
will illuminate and the unit will
beep when the unit is overheated or if the temperature
sensor short circuits. When this happens, power is cut
off automatically until the temperature returns to normal
range or the temperature sensor functions normally.
BURN HAzARD: Some exterior surfaces on unit will get
hot. Use caution when touching these areas.
CAUTION
WARNING
NOTICE
4. Press the Temperature Button (
)to scroll through and
select the desired temperature setting. The indicator above
each temperature setting will glow when that setting is
selected. There are three temperature settings:
• 195–212°F (91–100°C)—Steaming and rethermalizing
• 160–195°F (71–91°C)—Food warming/holding
• 120–160°F (49–71°C)—Food warming/holding
5. Press the mode Button (
) to scroll through and select
the desired heating mode. The indicator above each mode
will glow when that mode is selected. There are two heating
modes:
• Full Power mode ( ) — Unit operates at 100% power.
• Low Power mode ( ) — Unit operates at 50% power for
food warming and to avoid burning.
Control Panel
HEATED WELL
HATCO CORPORATION MILWAUKEE, WI U.S.A.
www.hatcocorp.com
Temperature
Button
Power
Indicator
ON/OFF
Button
Mode
Button
Fault
Indicator
OPERATION