Hasler IM6000 Series, User Manual, Page: 82 / 386

Running Permit Mail
After completing the initial set up in Steps to Set Up Permit Mail Printing on page 74, follow
the steps below to run mail.
Steps to Run Permit Mail
From the Print Mode: [Permit mail] home screen:
1. Start a new Operational Permit Report if necessary.
Press Reset/Report to open the Operational Permit Report screen and start a new
report.
You can also print the current report before starting the new one.
2. Select the sealing mode that corresponds to your mail stack: see Checking the
Sealing Mode on page 57.
3. Depending on the weighing mode selected, run mail according to one of the sections
below:
Steps to Run Mail in Dynamic Weighing Modes on page 62
Running Mail in Standard Weighing Mode on page 63
Running Mail in Manual Weighing Mode on page 67
When the sealer is activated, collect the mail piece stack in the
catch tray and put the stack aside to let the envelopes dry.
3
Processing
Mail
77
| Page 77 | Oct-05-2016 11:35 |