HASE Sendai 135, Operating Instructions Manual

Page: 48 / 96

48
12. Technical Data Sendai 135/155 and Sendai 175
The Sendai 135/155 and Sendai 175, certified in compliance with DIN-EN 13240
and Art. 15 a B-VG (Austria) , can only be operated when the fire box is closed.
Conforms with the DIBt (Deutschen Institut für Bautechnik/German Institute for Build-
ing Technology) approval criteria for direct vent fireplaces for solid fuels. Multiple
connections to the chimney are possible, see point 4. “Connection of Multiple
Devices in Direct Vent Operation”.
DIBt approval number: Z-43.12-396 / Typ FC41x and FC51x
The following data applies to the chimney characteristics in accordance with
EN 13384-1 / 2:
Combustion Values* Wood
Nominal Thermal Output 6 kW
Room heating output 6,6 kW
Exhaust gas temperature 236 ˚C
Waste Gas Outlet Temp. 299 ˚C
Waste Gas Mass Flow Rate 5.33 g/s
Min. Supply Pressure at Nominal Thermal Output** 12 Pa
Efficiency 83.5 %
CO content 817 mg/Nm³
Particulate 9 mg/Nm³
OGC 66 mg/Nm³
NO
X
99 mg/Nm³
Min. required combustion air volume 25 m³/h
* Test bench performance and values at 13% O
2
** For separate air supply in low-energy houses and insufficient combustion air supply in the room where
the stove is installed.
Dimensions: Height Width Depth
Stove 133/155/175 - 220 cm 37 cm 41 cm
Fire box 61 cm 21 cm 27 cm
Weight Sendai 135 140 kg
Weight Sendai 155 (without heat retaining block) 155 kg
Weight Sendai 175 (without heat retaining block)/Additional module 163/15 kg
Weight 1x heat retaining block flue pipe conection top/rear 63/52,5 kg
¹ Vertical flue pipe length min. 25 cm
Flue pipe diameter 15 cm
Pipe diameter of Hase ventilation system** 10 cm
Depending on the insulation of the building, the nominal thermal output of 6 kW indi-
cated on 20 - 80 m² (subject to change).