!
Remove handlebar screw 1 and 2.
!
Remove lock nut.
!
Remove excenter clamp screw and pull the excenter off
the steerer tube.
!
Unscrew the headset adjusting nut.
!
Pull the steerer tube out of the frame.
!
Now you can change the headset with its bearing races.
!
For assembling follow these steps vice versa. Remember
to adjust the headset with the adjusting nut, then insert
the excenter, the lock nut and tighten the excenter
headlock at last.
The excenter clamp screw has to be tightened with
the required torque for M6 screws (9Nm). These
screw must be fitted with locktide. If these screw
comes of, steering will fail.
Removing handlebar
S P E Z I A L R Ä D E R
H
A S
E
PINO
Page 20
As of 12.02
Removing handlebar, change headset
Handelbar skrew1
Handlebar skrew2
Headset
adjusting nut
Excenter for
steering rod
Lock nut
Excenter
clamp screw
Summary of Contents for Pino
Page 1: ...P I N O Owner s manual ...
