ASSEMBLY INSTRUCTIONS (CONT.)
5. Insert four BARREL NUTS #11 into each SIDE SUPPORT BRACE #15 then attach SIDE SUP-
PORT BRACES to each PEDESTAL PANEL as shown with BOLT #4 and 5/16” FLAT WASHER #5.
6
6. Pull each pre-installed LARGE BOLT #31 outward and tighten the attached nut.
Slide one 3/4” FLAT WASHER #2 onto each LARGE BOLT #31. Carefully lift the
assembled TABLE BODY and rest it in the center groove on the pedestal panels.
Secure TABLE BODY with 3/4” FLAT WASHER #2 and 3/4” HEX NUT #3.
