26
Removing Load
When the cycle (including drying phase) is com-
plete, three groups of three beeps will sound and
the COMPLETE indicator will light. If open door
drying was used, however, the COMPLETE
indicator will turn off after one minute.
O
PERATION
Figure 14
Removing Load
Hot Surface
Burn Hazard:
Processed load
and inner surfaces of the
sterilizer will be HOT at
completion of cycle. Wear
proper protective clothing when
removing load.
Warning
Burn Hazard:
Always stand
back (behind door) when
opening sterilizer door. Open
door slowly and only partially to
protect against steam escaping
from chamber, boiling liquids or
exploding flasks.
Note
Unwrapped instruments
processed in the sterilizer should
not be considered sterile when
exposed to unsterile
environments.
HOT