HTG-TEC-GUI-009_0
Release Mar 2021
page
32
of
37
NODESTER
Quad Mode
Decoder Output(s)
Output 2
Quad i...
•
On a 4ch decoder when a single input is selected the input will be shown on all outputs.
•
Single channel selection can also be used when using Combined mode (see below).
Quad Mode enables all 4 inputs (when connected to a 4ch encoder) to be displayed on a single
monitor output. This can be useful when there is a requirement for all channels to be recorded or
further streamed from a single channel device like the Harvest AVR2.
The number of quad modes available is reflected by the number of physical outputs on a device.
In the example below, quad mode is enabled on output 2 with quad inputs selected.
Input Selection
The input selection setting on a decoder controls the encoded stream from the encoder. When
quad input is selected all 4 inputs (when connected to a 4ch encoder) are encoded and streamed
to the decoder. When a single input (1, 2, 3 or 4) is selected, only that input is encoded and
streamed with all the set bandwidth allocated to that channel. Streaming a single channel enables
a much higher quality video stream.
®
Summary of Contents for NODESTREAM NODESTER
Page 1: ...User Manual node stream ...
