5
Installation of the 300SS
Locate the controls package. Select a mounting location for the Three Hundred Series (THS) control box (006-
3671SS) easily accessible that is away from moving parts and access panels. Check before drilling to ensure
nothing will be damaged on the opposite side of the THS. After selecting the location for the THS, use the THS
as a drill guide and mark the four mounting holes.
Drill the four mounting hole locations to 3/16" (5mm) in size. The locations shown in figures 1 and 2 are
examples of mounting the THS on the twine box (looking at the back of the baler). Use the supplied 10/32 x
3/4" Phillips flathead machine screws, nylock washers and nuts to mount the control box.
Figure 1
Figure 2
Summary of Contents for 300SS
Page 2: ...2 intentionally blank...
Page 14: ...14 Notes...