14
Setting up outputs on the Harvest-Master unit.
When you choose "Set-up Output" from the menu, the display will look like:
CHOOSE OUTPUT NO
9 (NOTHING )
The output number is displayed on the second line with the current setting of the output in
brackets. Use the up arrow
button to select the output number you want to change, then press OK.
9 CHOOSE TYPE
NOTHING
Use up arrow key to step though the output options then press OK for the output type you require.
These are: TIMER, PERIODIC, INPUT, INPUTPER (Input Periodic), 2INPUT, and INBURST.
1) TIMER Output. The software prompts for a start time and stop time.
9 START TIME
04:15
Use the arrow keys to change the digits so that the start and stop time values are set
2) PERIODIC Output. The start time is prompted for first:
10 START TIME
10:45
Set the start time desired then OK. Next entry is the period between the start of each cycle.
10 PERIOD MINS
00:10
The value is minutes and seconds. Press Ok. The software will prompt for duration of cycle.
10 DURATION Secs
0020
The units are seconds. This example gives Output 10, Periodic Timer, starts at 10:45, cycles
every 10 minutes, turns ON for 20 seconds.
3) INPUT Tied Output.
11 Choose Input
Input 1
Use the up arrow to select the input. Any inputs already used will not be displayed.
WHEN INPUT 1 ON
Output 11 OFF?
Press the up arrow to switch the display ON or OFF
WHEN INPUT 1 ON
Output 11 ON?
Once the combination you want is displayed, press Ok.
4) INPUTPDC (Input Tied To A Periodic Output).
12 CHOOSE INPUT
Input 2
Select Input, press Ok
WHEN INPUT 2 ON or WHEN INPUT 2 ON
Output 12 OFF? Output 12 ON?
Select by using the up arrow. (The first example above is called reverse polarity because the
periodic output is active while the input is off.)