E
[email protected] www.harvesthealthcare.co.uk
7
GENERAL INFORMATION
MOVING, HANDLING AND STORAGE
Where possible, bumper system should be stacked flat to prevent damage to the product.
It may require more than one person to aid in fitting the system.
The bumper system is to be stored between -5 to +40 degrees, in a dry environment.
Do not expose to high humidity or heat.
Do not drag or pull the bumper system by the cover.
SAFE USE
This product is intended as an aid to prevent accidental injury. With a carer present check the
material, zips and fastenings to ensure that these parts of the bumper systems have not been
damaged and do not introduce gaps or a hazard that could increase the risk of entrapment
suffocation or injury to the user.
Before and during the use of the bumper, consider the effectiveness of the system.
Seek advice to ensure the product is suitable for the bed before attempting to fit it. The
fasting straps must loop around the static parts of the bed. Thoroughly read the fitting
instructions supplied with this product. (Installation section)
Important Notice
Do not sit on the bumper or allow the bumper to be crushed when the bed is lowered to the
floor, as this will deform the product and could result in less protection being provided to the
user.
Beds used for Universal Safe Roll bumper installation, should always be operated in line with
their instructions for use.
WARRANTY
Bumper Systems
All Harvest Healthcare bumper systems are covered by warranty for a period of 1 year.
Damage through incorrect use will invalidate this warranty.
GUARANTEE
Harvest Healthcare Ltd guarantees to repair or replace all goods issued to its customers
which are found to be defective whilst still under their applicable warranty period. All
warranties are subject to our standard terms and conditions of sale which can be found on
our website or by request to Harvest Healthcare Ltd.