T
+44 (0)1709 377172
F
+44 (0)1709 377173
6
GENERAL INFORMATION
INSTRUCTIONS FOR USE
Check the product for damage, and if it is the correct type of product for the bed, before
carrying out the installation.
•
If the Universal Safe Roll bumper or any other part of the product looks damaged do not
fit to the bed.
•
Refer to the product code and pictures to make sure you’re using the right instruction for
use.
•
Before installing this product read the instruction for use thoroughly and seek advice if
you are unsure how to fit the product.
To help prevent injury it is important that patients and equipment are monitored regularly.
The Universal Safe Roll bumper may be delivered in a plastic cover for protection; these
covers must be removed and dispose of before the equipment can be used.
Please dispose of the plastic as specified by your local waste disposal service authority.
INTENDED PURPOSE
The Universal Safe Roll system is designed to dramatically change the landscape of falls
protection and support the reduction of the use of side rails. Traditional static floor mats are
often a trip hazard, have to be moved to accommodate moving and handling equipment, and
are frequently too thin to provide true protection from falls. This radial new design eliminates all
these issues, providing safety for the resident and exceptional ease of use for carers.
UNIVERSAL SAFE ROLL BUMPER SYSTEM INSPECTION RECOMMENDATIONS
The Universal Safe Roll bumper system should be checked regularly to ensure they remain ‘fit
for purpose’, effective and pose no risk of infection to either the patient or the carer.
Harvest Healthcare Ltd recommend that a thorough inspection of both the exterior (cover)
zips, straps and Velcro is carried out weekly, or each time a new patient is introduced to
this equipment. Visual checks should be carried out daily to identify any significant signs of
damage or infection risk.
If any signs of contamination are identified, the side rail system should be withdrawn from use
immediately and cleaned.
CLEANING AND CARE
The bumper system has a protective PU cover. The cover should be cleaned regularly in
accordance with your organisation’s disinfection protocol.
Facial contact with any covering material such as that used on this
product can cause suffocation and a Risk Assessment should be done
prior to the use of this product.
