E
[email protected] www.harvesthealthcare.co.uk
15
INSTALLATION
If the pump sounds an alarm, this is an indication of low
pressure. Switch off the pump to silence the alarm. If the fault
cannot be rectified, the system must be replaced.
1. Power Switch (audible warning reset)
The power switch simply switches the mains power to the pump on and off. When the
pump detects an audible warning condition, this can be silenced and reset by switching the
pump off and then back on again.
2. LED Indicators
The Blue LED indicates the pump is turned ‘on’.
The Red LED indicates a pressure issue in the mattress.
3. CPR Valve
Please ensure that the CPR connector is always placed fully home, prior to inflating the
mattress. The mattress will NOT inflate properly should this not be the case. The CPR
connector is only to be used in the event of a clinical emergency for priority use. However,
disconnecting this function will cleverly deflate air rapidly from the mattress in readiness for
transport / static mode.
