2. Adjusting the Wrist-Band
a. After attaching the gel pads, place the StopSnoring Advance one inch below the wrist like a
watch. Use the wrist strap to tighten/loosen it and then secure into position using the fastener.
b. Tighten and fix this end of the strap.
Note:
Do not pull the strap too tightly; it could result in poor circulation. The device functions
best when touching the skin gently.
3. Using the Device
a. Test the function of the device before use. Switch on the power and adjust the intensity to level 1.
b. Press the test button three times in a row. Check that the LED indicator (green light) is flashing.
The device will release a weak electrical impulse that lasts for about 5 seconds. You can adjust the
intensity to the level that you feel comfortable with.
1 inch
Instructions for Use
7
Stop
Snor
ing
Advance
Stop
Snor
ing
Advance
