3
Publication 5420-009 REV1.0
Please read the following safety precautions to ensure proper use of your VentElite.
If the equipment is used in a manner not specified, the protection provided by the
equipment may be impaired.
To Prevent Hazard or Injury
Use Proper Power Supply
The unit is supplied with an approved power supply and line cord. To maintain the safety
integrity of the device, use only the following:
General Safety Summary
Globtek Inc.
Model: GT-43006-4015-T3
Output: 15V DC, 2.7 A
Input:
100-240V, 50/60 Hz, 1.0 A
Use Proper Line Cord
Use only the specified line cord for this product and make sure the line cord is certified
for the country of use. The operating voltage range for the VentElite is 15 VDC. The
universal power supply operating voltage range is 100-240 VAC, 50/60 Hz.
Ground the Product
This product is grounded through the grounding conductor of the line cord. To avoid
electric shock, the grounding conductor must be connected to earth ground. Before
making any connections to the input or output terminals of the product, ensure that the
product is properly grounded.
Make Proper Connections
Make sure all connections are made properly and securely. Any signal wire connections
to the unit must be no longer than 3 meters.
Observe All Terminal Ratings
Review the operating manual to learn the ratings on all connections.
Avoid Exposed Circuitry
Do not touch any electronic circuitry inside of the product.
Do Not Operate with Suspected Failures
If damage is suspected on or to the product do not operate the product. Contact
qualified service personnel to perform inspection.
Orient the Equipment Properly
Do not orient the equipment so that it is difficult to operate the disconnection device.
