11
Rev 1.5
3.2 Front Panel Elements
3.2.1 CML00 3U / 8HP
1
Front panel 3U/8HP
5
USB connector
2
VAC Power entry module
6
Status LED
3
Main power switch
7
ON / OFF soft switch
4
Ethernet connector
8
Fuse
9
I / O Connector
3.2.2 Power entry module and fuse
The power entry module is provided with an IEC 320-C14 connector, contacted with fuse
holder 1 pole.
Caution!
The fuse values (6,3A T, 10A T) are only for incoming inspection.
The final value depends on the ready configuration of the completed system.
e.g. Number of power supplies.
3.2.3 Main Power switch.
Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1
If Power Switch “ON”, the CML and PSU are active in Standby mode, but the outputs on
Backplane are “OFF”
Figure 3-1: CML00
2
1
5
3
6
7
4
8
9