background image

HARTMANN TRESORE

18

12 | CLEANING AND CARE

13 | DISPOSAL

!

PLEASE NOTE!

Do not use any strong detergents or hard objects for cleaning.

• To clean the safe, please use a soft cloth and a mild, commercially available cleaning agent.  
  Do not use aggressive cleaning agents.
• Lubricate the door hinge regularly with a little commercial machine oil to maintain mobility.

PLEASE NOTE!

This appliance is marked in accordance with the European Directive 2002/96/EC 
on waste electrical and electronic equipment!
The appliance packaging is made of reusable materials

•  The correct separate collection of these appliances and its eco-friendly treatment and  
  disposal contribute to preventing potential negative impact on the environment and  
 health.
•  The packaging materials can be hazardous for children. For this reason, keep these
  materials out of the reach of children and dispose of them in accordance with the waste  
 instructions.
•  Do not dispose of the packaging materials together with normal waste.
•  If necessary, contact your authorised sales agent or the waste collection centre in your  
  region for information on disposal.
•  Remove the mains plug and any locks before disposal to protect children from possible  
 hazards

This symbol, which you can see on the product itself and in the 
product documents, means that the safe must not be disposed of 
with normal household waste. The product must be taken to a special 
waste collection centre to guarantee the regulation-compliant disposal 
required for electronic appliances. If necessary, contact the waste 
collection centre or your sales agent for further information.

!

Summary of Contents for HS 480 Series





















Reviews: